Ich habe das Gerät für eine Klanginstallation verwendet, bei der Bewegungsmelder eine Rolle spielen.
Dabei müssen die Schaltimpulse natürlich nicht zwingend von einem Fusschalter kommen. eines Fussschalters, auf MIDI-Ebene zu wandeln, um sie dort weiterzuverarbeiten. The box can be powered via MIDI, but getting the power adapter just made it easier as, once the box has been programmed it doesn't need to stay attached to a computer or MIDI Hub, so it can sit on the side of the stage, powered by the PSA.ĭer MIDI Solutions F8 ist ein Gerät, um die Schaltimpulse, z.B. Only thing I would suggest is to get the power adapter (Item no: 258434). This allowed the Big Sky to be controlled from multiple positions on the stage, without the need to run back and forth across the stage, or have multiple units. The next implementation was to connect a Strymon Big Sky to the F8 via MIDI and send Program changes via Boss FS-5U switches. So I connected the looper to the FB via MIDI, and then programmed the box to send CC# to 3 Boss FS-5U switches which could be then positioned in locations more fitting to his performance style. The initial problem I had was a guitarist was adding a looper to his stage set up, but due to the other pedals he uses, it was difficult to have the looper close enough to tap on the switches easily. They are robust, and easy to program, and very flexible.
A MIDI indicator LED lights up when the product is powered and flashes when MIDI data passes through it.ĭimensions: 112 x 62 x 31 mm (4.4″ x 2.4″ x 1.I initially purchased a b-stock version to "play" with to see if it could solve a problem I was having, and now I have two and about to order a third. The Breath Controller is MIDI-powered, and requires no batteries or power supply to operate with most MIDI products (for more information read the Power FAQs). The Breath Controller’s factory default settings are for it to send CC #7 (volume) on MIDI channel 1, with the Echo parameter set to ON. The Breath Controller can be reprogrammed with new settings as often as needed. Once programmed, the Breath Controller’s settings are retained even after power is removed. This is easily done with the MIDI Solutions Programming Tools software.
The Breath Controller is programmed by sending it MIDI System Exclusive messages (read the Programming FAQs for more details). This allows you to correct for a nonlinear response, or to add greater response at one end of the breath range compared to the other. The Breath Controller includes a MIDI Echo parameter that is selectable on/off.Īnother unique feature of the Breath Controller is its ability to add a variable amount of curvature to the response of the applied pressure of the BC3A. The Breath Controller can be programmed to send: The MIDI Solutions Breath Controller generates continuous MIDI data corresponding to the amount of breath pressure applied to the attached breath control device.
The MIDI Solutions Breath Controller will also accept older Yamaha BC2 units. Yamaha is no longer producing the BC3A, however Kelfar Technologies is now producing a breath control device that is compatible with the MIDI Solutions Breath Controller, for more information see the Kelfar BCK-1. The MIDI Solutions Breath Controller was originally designed as a breath to MIDI converter for use with the Yamaha BC3A Breath Controller.
0 kommentar(er)
